פתח תפריט ניווט

קטגוריות ראשיות

כל הקטגוריות
לכניסה לחנות >
לכניסה לחנות >

TEAC - TN-400BT-X

עכשיו בפיוצ’ר כל ליין הפטיפונים של חברת TEAC במחיר מעולה. ה-TEAC TN-400BT-X הוא פטיפון אנלוגי המאפשר השמעת תקליטי LP בצורה אלחוטית באמצעות אוזניות ורמקולים עם חיבור Bluetooth®. פלטת האלומיניום היצוקה מספקת מהירות סיבוב מדויקת, בעוד זרוע הטון בצורת S, העשויה מאלומיניום ומאוזנת סטטית, מבטיחה מעקב מדויק אחרי התקליט. מגבר הפונו המובנה מאפשר חיבור ישיר למערכת אודיו מסורתית שאין לה כניסת פונו.

הפטיפון כולל משדר Bluetooth® עם תמיכה בקודק Qualcomm® aptX™ Adaptive, שמאפשר האזנה לתקליטים באיכות שמע גבוהה וללא השהיה משמעותית דרך אוזניות או רמקולים התומכים ב-aptX™ Adaptive.

לנוחות המשתמש, הפטיפון מגיע עם ראש מחט מסוג Moving Magnet איכותי המיוצר ביפן, מותקן מראש, כך שניתן להתחיל להאזין לתקליטים במהירות וללא צורך בהגדרה ממושכת.
לעוד פרטים ניתן ליצור קשר עם אולם התצוגה בתל אביב.

קרדיט:

The TN-400BT-X is an analog turntable that also enables to playback LP records wirelessly via Bluetooth® headphones & speakers. A die-cast aluminium platter provides accurate rotational speed while an S-shaped static-balanced aluminum tone-arm provides accurate tracking. The built-in Phono EQ amplifier enables the TN-400BT-X to be connected to a conventional hi-fi audio system not having phono input.

A built-in Bluetooth® transmitter codec supports Qualcomm® aptX™ Adaptive. It enables to playback LP records with high-quality audio and low-latency via Bluetooth® headphones or Bluetooth® speakers supporting the Qualcomm® aptX™ Adaptive.

For convenience, a quality Japanese-made moving magnet-type cartridge comes pre-installed, so users can quickly start enjoying their records without a lengthy set-up procedure.

 

Aluminum die-cast platter with 3-speed belt-drive

A die-cast, high-inertia aluminum platter is driven by a high-torque DC motor via a durable rubber flat-belt, giving immensely stable playback at 33-⅓, 45 and 78 rpm speeds.

TN-400BT-X
New low-resistance spindle

A precisely-machined stainless steel spindle and durable brass bearing maintain accurate rotational speed, thanks to reduced friction.

Natural walnut veneer finish with laser-engraved logo

The TN-400BT-X is available in natural varnished walnut veneer finish with laser-engraved TEAC logo.

TN-400BT-X
Built-in Phono EQ amplifier

The TN-400BT-X has an onboard Phono EQ amplifier that supports MM-type cartridges, allowing the deck to be connected to conventional amplifiers/micro systems that lack a dedicated turntable input. The Phono EQ amplifier employs a hi-fi quality NJM8080 op-amp chip (designed by JRC) which amplifies the tiny audio signal from the stylus with the minimum of distortion.

S-shaped static-balanced tone-arm

The S-shaped, static-balanced aluminum tone-arm is equipped with a counterweight and anti-skating mechanism that allow an exact setting of balance as well as tracking pressure, ensuring accurate tracking during playback. A tone-arm lifter is also fitted for smooth lowering of the tone-arm onto records.
The tone-arm takes universal-type headshells so users can change cartridges with relative ease. In order to reduce signal losses between the tone-arm and the headshell, gold-plated contact points are employed, to help deliver an uncorrupted audio signal.

TN-400BT-X
Bluetooth® wireless audio streaming with Qualcomm® aptX™ Adaptive codec

The TN-400BT-X's Bluetooth® wireless transmission system supports the higher quality Qualcomm® aptX™ Adaptive codecs, as well as the conventional SBC codec. This means that even if users don't have a hi-fi system, then can still enjoy truly high-quality vinyl replay via Bluetooth®-equipped headphones or speakers. Connecting the TN-400BT-X to Bluetooth® headphones or speakers is achieved very simply, at the touch of a button. A single-function pairing key and an associated LED indicator provide simple and clear confirmation of the connection status.

TN-400BT-X
Beautifully detailed

The TN-400BT-X brings elegance to the process of playing a record. The machined aluminum operation knobs ooze quality while the aluminum feet, attached to high-density MDF chassis via shock-absorbing rubber, provide a high resistance to feedback.

MM-type Cartridge from audio-technica

The deck comes with an excellent, all-purpose MM cartridge, employing a lightweight aluminum cantilever, which helps deliver an accurate, highly musical standard of playback.

TN-400BT-X
MM-type Cartridge from audio-technica

The deck comes with an excellent, all-purpose MM cartridge, employing a lightweight aluminum cantilever, which helps deliver an accurate, highly musical standard of playback.

 

Features at a glance

Robust high-density MDF plinth provides both vibration isolation and elegance

Available in a selection of contemporary matt finishes, or a natural walnut veneer

3-speed belt-drive mechanism with aluminum die-cast platter (33-⅓, 45, 78 rpm)

Low-resistance spindle for stable rotational speed

Static-balanced S-shaped tone-arm with universal-type headshell

Pre-installed MM-type AT95E cartridge from audio-technica

Built-in Phono EQ Amplifier

High-quality Bluetooth® Qualcomm® aptX™ and Qualcomm® aptX™ Adaptive wireless audio transmission

Floating-construction using decoupled feet provides high feedback resistance

Machined aluminum operation knobs and feet

Gold-plated RCA jacks (for LINE/PHONO output) and tone-arm contacts

GND terminal on rear panel

RCA audio cable with GND wiring included

      *This product does not have a USB digital output.
 

Spec description

Turntable section  
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-⅓, 45, 78 rpm
Wow-and-Flutters 0.2%
S/N Ratio more than 67dB (A-weighted)
60dB (unweighted, 20kHz, LPF)
Turntable (Platter)  
Material Aluminum Die-cast
Diameter 30cm
Tone-arm section  
Type S-shaped, Static-balanced
Effective Length 223mm
Needle Pressure Range 0g to 5g
Compatible Cartridge Weight 4g to 8g
14g to 18g (including Head-shell)
Head-shell and Cartridge sections  
Model of Cartridge audio-technica AT95E
Type of Cartridge MM-type (VM-type)
Frequency Response 20Hz to 20,000Hz
Output Voltage 3.5mV (1kHz, 5cm/sec.)
Channel Separation 20dB (1kHz)
Output Balance 2.0 dB (1kHz)
Needle Pressure 1.5g to 2.5g (appropriate value: 2.0g)
Needle Life approx. 300 hours (depends on conditions)
Coil Impedance 2.8kohms (1kHz)
DC Resistance 410ohms
Loading Resistance 47kohms
Loading Capacity 100 to 200pF
Coil Inductance 400mH (1kHz)
Static Compliance 20 × 10-6cm/dyne
Dynamic Compliance 6.5 × 10-6cm/dyne (100Hz)
Needle Shape Joint-oval 0.3 × 0.7mil
Cantilever Aluminum Pipe
Vertical Tracking Degree 20 degrees
Overall Dimensions 17.0(W) × 17.2(H) × 30.5(D) mm
Weight 5.7 g
Head-shell Weight 10g (including nuts, screws, and wires)
Analog Output section  
Connectors RCA jack × 1 pair (Gold-plated)
Output Voltage  
PHONO 3.5mV +/-3dB
LINE 155mV (-16dBV)
Bluetooth® section  
Bluetooth version 5.2 (DUAL MODE)
Profile A2DP
Codecs SBC, Qualcomm® aptX™ audio, Qualcomm® aptX™ Adaptive
Operation Power  
AC Adapter Input AC 100 - 240V, 50/60Hz
AC Adapter Output DC 12V 500mA
Power Consumption 1.5W or less
Standby Power 0.5W or less
Dimensions (including protrusions) 420(W) × 117(H) × 356(D) mm /
16.5"(W) × 4.6"(H) × 14.0"(D)
Weight 4.9kg / 10.8lbs
Operating temperature range 5°C to 35°C
Included Accessories Felt Mat, EP Adapter, Counter Weight, Headshell (audio-technica AT95E installed), Platter, Dust Cover, Dust Cover Hinges × 2, RCA Audio Cable with GND wiring, AC Adapter (GPE053A-V120050-Z), Owner's Manual (including Warranty Card)

 

מחיר: 2,590 ₪
משלוח חינם
משלוח חינם: 0 ₪
אחריות: אחריות לשנה - יבואן רשמי
זמן אספקה: 7 ימים , קיימת אפשרות לאיסוף עצמי
למה לקוחות קונים אצלנו:
  • אחריות: אחריות לשנה - יבואן רשמי  
  • אפשרות לעד 12 תשלומים ללא ריבית 
  • משלוח חינם, קניה מאובטחת ושירות לקוחות מעולה 
אחריות לשנה - יבואן רשמי חודשי אחריות
משלוח חינם משלוח חינם
קניה בטוחה
שאל אותנו על מוצר זה

מידע נוסף

The TN-400BT-X is an analog turntable that also enables to playback LP records wirelessly via Bluetooth® headphones & speakers. A die-cast aluminium platter provides accurate rotational speed while an S-shaped static-balanced aluminum tone-arm provides accurate tracking. The built-in Phono EQ amplifier enables the TN-400BT-X to be connected to a conventional hi-fi audio system not having phono input.

A built-in Bluetooth® transmitter codec supports Qualcomm® aptX™ Adaptive. It enables to playback LP records with high-quality audio and low-latency via Bluetooth® headphones or Bluetooth® speakers supporting the Qualcomm® aptX™ Adaptive.

For convenience, a quality Japanese-made moving magnet-type cartridge comes pre-installed, so users can quickly start enjoying their records without a lengthy set-up procedure.

 

Aluminum die-cast platter with 3-speed belt-drive

A die-cast, high-inertia aluminum platter is driven by a high-torque DC motor via a durable rubber flat-belt, giving immensely stable playback at 33-⅓, 45 and 78 rpm speeds.

TN-400BT-X
New low-resistance spindle

A precisely-machined stainless steel spindle and durable brass bearing maintain accurate rotational speed, thanks to reduced friction.

Natural walnut veneer finish with laser-engraved logo

The TN-400BT-X is available in natural varnished walnut veneer finish with laser-engraved TEAC logo.

TN-400BT-X
Built-in Phono EQ amplifier

The TN-400BT-X has an onboard Phono EQ amplifier that supports MM-type cartridges, allowing the deck to be connected to conventional amplifiers/micro systems that lack a dedicated turntable input. The Phono EQ amplifier employs a hi-fi quality NJM8080 op-amp chip (designed by JRC) which amplifies the tiny audio signal from the stylus with the minimum of distortion.

S-shaped static-balanced tone-arm

The S-shaped, static-balanced aluminum tone-arm is equipped with a counterweight and anti-skating mechanism that allow an exact setting of balance as well as tracking pressure, ensuring accurate tracking during playback. A tone-arm lifter is also fitted for smooth lowering of the tone-arm onto records.
The tone-arm takes universal-type headshells so users can change cartridges with relative ease. In order to reduce signal losses between the tone-arm and the headshell, gold-plated contact points are employed, to help deliver an uncorrupted audio signal.

TN-400BT-X
Bluetooth® wireless audio streaming with Qualcomm® aptX™ Adaptive codec

The TN-400BT-X's Bluetooth® wireless transmission system supports the higher quality Qualcomm® aptX™ Adaptive codecs, as well as the conventional SBC codec. This means that even if users don't have a hi-fi system, then can still enjoy truly high-quality vinyl replay via Bluetooth®-equipped headphones or speakers. Connecting the TN-400BT-X to Bluetooth® headphones or speakers is achieved very simply, at the touch of a button. A single-function pairing key and an associated LED indicator provide simple and clear confirmation of the connection status.

TN-400BT-X
Beautifully detailed

The TN-400BT-X brings elegance to the process of playing a record. The machined aluminum operation knobs ooze quality while the aluminum feet, attached to high-density MDF chassis via shock-absorbing rubber, provide a high resistance to feedback.

MM-type Cartridge from audio-technica

The deck comes with an excellent, all-purpose MM cartridge, employing a lightweight aluminum cantilever, which helps deliver an accurate, highly musical standard of playback.

TN-400BT-X
MM-type Cartridge from audio-technica

The deck comes with an excellent, all-purpose MM cartridge, employing a lightweight aluminum cantilever, which helps deliver an accurate, highly musical standard of playback.

 

Features at a glance

Robust high-density MDF plinth provides both vibration isolation and elegance

Available in a selection of contemporary matt finishes, or a natural walnut veneer

3-speed belt-drive mechanism with aluminum die-cast platter (33-⅓, 45, 78 rpm)

Low-resistance spindle for stable rotational speed

Static-balanced S-shaped tone-arm with universal-type headshell

Pre-installed MM-type AT95E cartridge from audio-technica

Built-in Phono EQ Amplifier

High-quality Bluetooth® Qualcomm® aptX™ and Qualcomm® aptX™ Adaptive wireless audio transmission

Floating-construction using decoupled feet provides high feedback resistance

Machined aluminum operation knobs and feet

Gold-plated RCA jacks (for LINE/PHONO output) and tone-arm contacts

GND terminal on rear panel

RCA audio cable with GND wiring included

      *This product does not have a USB digital output.
 

Spec description

Turntable section  
Type Belt Drive
Motor DC Motor
Rotation Speeds 33-⅓, 45, 78 rpm
Wow-and-Flutters 0.2%
S/N Ratio more than 67dB (A-weighted)
60dB (unweighted, 20kHz, LPF)
Turntable (Platter)  
Material Aluminum Die-cast
Diameter 30cm
Tone-arm section  
Type S-shaped, Static-balanced
Effective Length 223mm
Needle Pressure Range 0g to 5g
Compatible Cartridge Weight 4g to 8g
14g to 18g (including Head-shell)
Head-shell and Cartridge sections  
Model of Cartridge audio-technica AT95E
Type of Cartridge MM-type (VM-type)
Frequency Response 20Hz to 20,000Hz
Output Voltage 3.5mV (1kHz, 5cm/sec.)
Channel Separation 20dB (1kHz)
Output Balance 2.0 dB (1kHz)
Needle Pressure 1.5g to 2.5g (appropriate value: 2.0g)
Needle Life approx. 300 hours (depends on conditions)
Coil Impedance 2.8kohms (1kHz)
DC Resistance 410ohms
Loading Resistance 47kohms
Loading Capacity 100 to 200pF
Coil Inductance 400mH (1kHz)
Static Compliance 20 × 10-6cm/dyne
Dynamic Compliance 6.5 × 10-6cm/dyne (100Hz)
Needle Shape Joint-oval 0.3 × 0.7mil
Cantilever Aluminum Pipe
Vertical Tracking Degree 20 degrees
Overall Dimensions 17.0(W) × 17.2(H) × 30.5(D) mm
Weight 5.7 g
Head-shell Weight 10g (including nuts, screws, and wires)
Analog Output section  
Connectors RCA jack × 1 pair (Gold-plated)
Output Voltage  
PHONO 3.5mV +/-3dB
LINE 155mV (-16dBV)
Bluetooth® section  
Bluetooth version 5.2 (DUAL MODE)
Profile A2DP
Codecs SBC, Qualcomm® aptX™ audio, Qualcomm® aptX™ Adaptive
Operation Power  
AC Adapter Input AC 100 - 240V, 50/60Hz
AC Adapter Output DC 12V 500mA
Power Consumption 1.5W or less
Standby Power 0.5W or less
Dimensions (including protrusions) 420(W) × 117(H) × 356(D) mm /
16.5"(W) × 4.6"(H) × 14.0"(D)
Weight 4.9kg / 10.8lbs
Operating temperature range 5°C to 35°C
Included Accessories Felt Mat, EP Adapter, Counter Weight, Headshell (audio-technica AT95E installed), Platter, Dust Cover, Dust Cover Hinges × 2, RCA Audio Cable with GND wiring, AC Adapter (GPE053A-V120050-Z), Owner's Manual (including Warranty Card)

 

חזרה למעלה
קנה עכשיו

\