It delivers all the power, finesse and clean detail of the smaller P4-W65 in-wall speaker, but ramps it all up for bigger spaces. The 8in MSP (Magnesium Silicate Polymer) woofer is complemented by a Dynaudio 28mm coated soft-dome tweeter, and sits in a one-piece frame that’s a piece of cake to install.
Once done, adjust the tweeter sensitivity (-3dB, 0dB or +3dB are available) to suit the room, fit the paintable magnetic grille and it’s job done.
Specification sheet for Performance Series part 2
| Type: |
2-way in-wall |
| Drivers: |
Tweeter: 28 mm (1 in) |
| |
Mid/bass: 200 mm (8 in) |
| Frequency response (+/- 3 dB): |
42 Hz–20 kHz |
| Impedance (nominal/minimum): |
8 Ω / 5 Ω |
| Sensitivity (dB SPL [2.83 V/1 m]): |
89 dB |
Specification sheet for Performance Series part 1
| Continuous power: |
50 W |
| Long term power: |
160 W |
| Tweeter level options: |
-3 dB, 0 dB, +3 dB |
| Dimensions (W x H x D): |
237 x 392 mm x 77 mm |
| |
9 5⁄16 x 15 3⁄8 in x 3 in |
| Cut-out dimensions: |
215 x 370 mm |
| |
8 1⁄2 x 14 1⁄2 in |
