What do you do if you don’t have the space for a full install system… but you still want a full install system? You could modify the wall, of course (which could mean big time and money); you could compromise on the speaker you put in the cavity (which would mean inferior sound); or you could go for this slimline in-wall model.
The P4-W65 is just 63mm deep, so it will fit into ridiculously tight spaces with the same ease that you’d expect from a Dynaudio Custom speaker.
Like all of our other speakers it uses a 28mm coated soft-dome tweeter and a Magnesium Silicate Polymer woofer (a 6.5in version, in this case). And it’s all housed in a one-piece chassis that secures into place with the turn of a few screws.
You can fine-tune the tweeter’s response to -3dB, 0dB or +3dB to really tailor the speaker to the room. And, for the finishing touch, the included magnetic grille is paintable – so it can be coloured to fit seamlessly with the rest of the room’s décor.
Specification sheet for Performance Series part 2
| Type: |
2-way in-wall |
| Drivers: |
Tweeter: 28 mm (1 in) |
| |
Mid/bass: 165 mm (6 1⁄2 in) |
| Frequency response (+/- 3 dB): |
46 Hz–20 kHz |
| Impedance (nominal/minimum): |
8 Ω /5 Ω |
| Sensitivity (dB SPL [2.83 V/1 m]): |
87.5 dB |
Specification sheet for Performance Series part 1
| Continuous power: |
40 W |
| Long term power: |
80 W |
| Tweeter level options: |
-3 dB, 0 dB, +3 dB |
| Dimensions (W x H x D): |
198 x 296 mm x 63 mm |
| |
7 3/4 in x 11 11/16 in x 2 1⁄2 in |
| Cut-out dimensions: |
175 x 275 mm |
| |
6 7⁄8 x 10 7⁄8 in |
